Project Request Step 1 of 6 16% Choose from the following categories(Required) Photogrammetry 3D-Laserscanning Bathymetry Project type(Required) Surveying 3D visualization Surveying & 3D visualization Raw data(Required) RGB images Thermal images Multispectral images 3D point cloud already available?(Required) yes no Is the 3D point cloud already georeferenced?(Required) yes no, does not need to be georeferenced no, please georeference We need to create a 3D point cloud. Should it be georeferenced?(Required) yes no How should the 3D point cloud be georeferenced?(Required) RTK PPK Ground contol points EPSG-Code(Required)EPSG-Code(Required)EPSG-Code(Required)How were the laser scans created?(Required) ULS (drone) ALS (aircraft) TLS (terrestrial) 3D point cloud(s) already georeferenced?(Required) yes no, does not need to be georeferenced no, please georeference How should the 3D point cloud be georeferenced?(Required) RTK PPK Ground control points EPSG-Code(Required)EPSG-Code(Required)In which file format are the raw data available?(Required)Which coordinate system was used?EPSG-Code(Required)Which echo sounder system was used?(Required) Singlebeam Multibeam Manufacturer and model(Required)Is it a dual-frequency echo sounder?(Required) yes no Are absolute water depths (elevations above sea level) already available?(Required) yes no, not required no, please convert from relative to absolute Water level elevation above sea level at the time of measurement:(Required) Which data should be created?(Required) 3D point cloud DSM DTM Orthomosaic Hillshading Contour lines (2D) Contour lines (3D) Breaklines Terrain cross sections Digital twin (3D model) Which data should be created?(Required) 3D-Punktwolke DSM DTM Orthomosaic Hillshading Contour lines (2D) Contour lines (3D) Breaklines Terrain cross sections Digital twin (3D model) Which data should be created? DSM DTM Orthomosaic Hillshading Contour lines (2D) Contour lines (3D) Breaklines Terrain cross sections Which data should be created? DTM Hillshading Contour lines (2D) Contour lines (3D) Breaklines Terrain cross sections Are additional services required?(Required) CAD drawing (2D) CAD drawing (3D) Topographic mapping Stockpile measurement Volume calculation GIS services 3D web interface Number of images (raw data)RGBThermalMultispectralAre additional services required? CAD drawing (2D) CAD drawing (3D) Topographic mapping Stockpile measurement Volume calculation 3D model (BIM / MEP) GIS services Are additional services required? CAD drawing (2D) CAD drawing (3D) Topographic mapping Stockpile measurement Volume calculation GIS services Size of the point cloud(s)ULS (drone)ALS (aircraft)TLS (terrestrial)Are additional services required? CAD drawing (2D) CAD drawing (3D) Topographic mapping Volume calculation GIS services Sediment layer analysis Combine with other survey data Sind sonstige Leistungen gewünscht? CAD drawing (2D) CAD drawing (3D) Topographic mapping Volume calculation GIS services Combine with other survey data Size of the echo sounder file Project title(Required)Would you like to tell us anything else? CompanyFirst name(Required)Last name(Required)Street(Required)House number(Required)Postal code(Required)City(Required)Country(Required)Phone numberEmail address(Required)
